|
LoRaMAC
4.6.0
Documentation of the API
|
Go to the documentation of this file.
37 #ifndef __REGION_CN779_H__
38 #define __REGION_CN779_H__
50 #define CN779_MAX_NB_CHANNELS 16
55 #define CN779_NUMB_DEFAULT_CHANNELS 3
60 #define CN779_NUMB_CHANNELS_CF_LIST 5
65 #define CN779_TX_MIN_DATARATE DR_0
70 #define CN779_TX_MAX_DATARATE DR_7
75 #define CN779_RX_MIN_DATARATE DR_0
80 #define CN779_RX_MAX_DATARATE DR_7
85 #define CN779_DEFAULT_DATARATE DR_0
90 #define CN779_MIN_RX1_DR_OFFSET 0
95 #define CN779_MAX_RX1_DR_OFFSET 5
100 #define CN779_MIN_TX_POWER TX_POWER_5
105 #define CN779_MAX_TX_POWER TX_POWER_0
110 #define CN779_DEFAULT_TX_POWER TX_POWER_0
115 #define CN779_DEFAULT_MAX_EIRP 12.15f
120 #define CN779_DEFAULT_ANTENNA_GAIN 2.15f
125 #define CN779_DUTY_CYCLE_ENABLED 1
130 #define CN779_MAX_RX_WINDOW 3000
135 #if ( CN779_DEFAULT_DATARATE > DR_5 )
136 #error "A default DR higher than DR_5 may lead to connectivity loss."
142 #define CN779_RX_WND_2_FREQ 786000000
147 #define CN779_RX_WND_2_DR DR_0
152 #define CN779_DEFAULT_UPLINK_DWELL_TIME 0
160 #define CN779_BEACON_CHANNEL_FREQ 785000000
165 #define CN779_PING_SLOT_CHANNEL_FREQ 785000000
170 #define CN779_BEACON_SIZE 17
175 #define CN779_RFU1_SIZE 1
180 #define CN779_RFU2_SIZE 0
185 #define CN779_BEACON_CHANNEL_DR DR_3
190 #define CN779_BEACON_CHANNEL_BW 0
195 #define CN779_PING_SLOT_CHANNEL_DR DR_3
200 #define CN779_MAX_NB_BANDS 1
206 #define CN779_BAND0 { 100, CN779_MAX_TX_POWER, 0, 0, 0, 0, 0 } // 1.0 %
212 #define CN779_LC1 { 779500000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 }
217 #define CN779_LC2 { 779700000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 }
223 #define CN779_LC3 { 779900000, 0, { ( ( DR_5 << 4 ) | DR_0 ) }, 0 }
228 #define CN779_JOIN_CHANNELS ( uint16_t )( LC( 1 ) | LC( 2 ) | LC( 3 ) )
233 static const uint8_t DataratesCN779[] = { 12, 11, 10, 9, 8, 7, 7, 50 };
238 static const uint32_t BandwidthsCN779[] = { 125000, 125000, 125000, 125000, 125000, 125000, 250000, 0 };
243 static const uint8_t MaxPayloadOfDatarateCN779[] = { 51, 51, 51, 115, 242, 242, 242, 242 };
449 #endif // __REGION_CN779_H__
AlternateDrType_t
Definition: Region.h:756
LoRaMacStatus_t
Definition: LoRaMac.h:2345
uint8_t RegionCN779ApplyDrOffset(uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset)
Computes new datarate according to the given offset.
bool RegionCN779RxConfig(RxConfigParams_t *rxConfig, int8_t *datarate)
Configuration of the RX windows.
int8_t RegionCN779AlternateDr(int8_t currentDr, AlternateDrType_t type)
Alternates the datarate of the channel for the join request.
uint8_t RegionCN779RxParamSetupReq(RxParamSetupReqParams_t *rxParamSetupReq)
The function processes a RX Parameter Setup Request.
bool RegionCN779ChanMaskSet(ChanMaskSetParams_t *chanMaskSet)
Sets a channels mask.
PhyAttribute_t
Definition: Region.h:85
bool RegionCN779Verify(VerifyParams_t *verify, PhyAttribute_t phyAttribute)
Verifies a parameter.
LoRaMacStatus_t RegionCN779ChannelAdd(ChannelAddParams_t *channelAdd)
Adds a channel.
bool RegionCN779ChannelsRemove(ChannelRemoveParams_t *channelRemove)
Removes a channel.
LoRaMacStatus_t RegionCN779NextChannel(NextChanParams_t *nextChanParams, uint8_t *channel, TimerTime_t *time, TimerTime_t *aggregatedTimeOff)
Searches and set the next random available channel.
void RegionCN779SetBandTxDone(SetBandTxDoneParams_t *txDone)
Updates the last TX done parameters of the current channel.
int8_t RegionCN779TxParamSetupReq(TxParamSetupReqParams_t *txParamSetupReq)
The function processes a TX ParamSetup Request.
bool RegionCN779TxConfig(TxConfigParams_t *txConfig, int8_t *txPower, TimerTime_t *txTimeOnAir)
TX configuration.
PhyParam_t RegionCN779GetPhyParam(GetPhyParams_t *getPhy)
The function gets a value of a specific phy attribute.
void RegionCN779InitDefaults(InitDefaultsParams_t *params)
Initializes the channels masks and the channels.
int8_t RegionCN779NewChannelReq(NewChannelReqParams_t *newChannelReq)
The function processes a Channel Request.
uint8_t RegionCN779LinkAdrReq(LinkAdrReqParams_t *linkAdrReq, int8_t *drOut, int8_t *txPowOut, uint8_t *nbRepOut, uint8_t *nbBytesParsed)
The function processes a Link ADR Request.
void RegionCN779RxBeaconSetup(RxBeaconSetup_t *rxBeaconSetup, uint8_t *outDr)
Sets the radio into beacon reception mode.
void RegionCN779ComputeRxWindowParameters(int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams)
int8_t RegionCN779DlChannelReq(DlChannelReqParams_t *dlChannelReq)
The function processes a DlChannel Request.
void RegionCN779ApplyCFList(ApplyCFListParams_t *applyCFList)
The function parses the input buffer and sets up the channels of the CF list.